Van xả nước tự động ORION FD6-G3 dạng phao

Bộ xả tự động dạng phao (Float operated) do Orion sản xuất còn có :

• FD2-G3
• FD2-NC-G3
• FD-5-G3
• FD-10-A

The ORION FD6-G3 is an automatic drain trap designed by ORION Machinery Co., LTD.

1. Model: FD6-G3
2. Maximum Drain Capacity: 10 cm³ per cycle (at 0.69 MPa)
3. Operating Pressure Range: 0.1 to 1 MPa
4. Operating Temperature Range: 0°C to 60°C (equivalent to 36°F to 140°F)
5. Connection Port Size:
   • Drain Inlet Port: Rc1/2
   • Drain Outlet Port: Rc1/2
   • Sludge Drain Port: Not specified
6. Features:
   • Float Operated: Drains without air loss.
   • Adjustable Drain Interval: You can set the drain release interval as needed.
7. Dimensions (H x D x W): 201 mm × 80 mm × 80 mm
8. Weight: 0.45 kg
9. Additional Notes:
   • The drain intake port (G3 piping connection port) can be connected from either above or from the side. Ensure that the unused port is sealed with a plug.
   • For indoor use (not exposed to water splash).
   • Includes a manual drain release (test) button.
   • In very cold climates, an anti-freeze heater is required to prevent freezing of the drain.
   • If drain piping is aggregated, install check valves to prevent pressure from other drain traps.
   • Piping (inlet and outlet) should have an inside diameter of at least 12 mm.